Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
#1 Posted : 04 September 2019 12:44:13(UTC)

Rank: Newbie

Groups: Registered
Joined: 08/02/2019(UTC)
Posts: 0
Location: Rome

lthough IIoT architectures have many use case-specific variations, in this section, we shall consider a basic example architecture to establish the context. Subsequent chapters present multiple IIoT reference architectures and architecture-based case studies.

Most IIoT deployments are brownfield, and involve both new and legacy technologies. In the following diagram, the main components of the architecture are:
- Sensor networks (communicating over Wi-Fi/BLE)
- A controller/aggregator
- An edge gateway connecting the industrial systems to cloud-based platforms for analytics
- Business applications used for data visualization and insights

A typical IIoT deployment architecture:


In the case of a brownfield deployment, as shown in the following diagram, the SCADA network is connected to the cloud via an edge gateway. Traffic needs to be securely controlled both at the ingress and at the egress of the edge device. A brownfield IIoT architecture for an ICS/SCADA system:


In the case of a large wind farm, several remote windmill units are controlled by the ICS/SCADA system. With the adoption of IIoT, the wind farm gets connected to a cloud-based IoT platform. Data from the wind turbines is sent up to a data center to do analytics and so on in the cloud. The turbine data has to go through an edge device, which can be a gateway, center hub, or edge controller. This edge device collects telemetry and diagnostics information from the wind farm sensors. In this edge device, a lot of protocol handshakes and translations occur, and as such, it provides a sweet spot for attackers to inject malware. The vulnerable edge device needs to be fortified with security counter measures. For example, deep inspection of packet flow to inspect both IT and OT protocols (MODBUS, TCP, and UDP) to detect anomalies is important.

Such deployments involving multiple vendors and technologies provide a favorable environment for mistakes, oversight, and misconfigurations. So, there must be enough visibility to see exactly what's happening in the OT network. In traditional OT networks, there is a serious lack of traffic visibility as compared to IT networks, in terms of traffic flows, source destination information, and so on. That's because historically, OT environments were considered immune to cyberattacks. Besides that, proprietary technologies and "security by obscurity" principles were erroneously deemed to be secure by design.

Users browsing this topic
Guest (2)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.